toolrankcom_100x358
Manufacturer News

Manufacturer News

92 results - showing 71 - 80  
1 2 3 4 5 6 7 8 9 10  
Ordering 
 
Chris   July 02, 2009   0   0  
The first new compressor from Campbell Hausfeld comes in at a size of 26 gallons. It is a nice size compressor for use around the garage or at the shop. It sports a couple cool features that set it apart from the rest. The first being "Rapid Inflation Technology" which first fills the hose to 115 psi so you can get started, then fills the rest of the tank, so you will be ready for longer periods of use. Another nice feature is an easy to read regulator gauge. The gauge also has icons...
Chris   June 22, 2009   0   0  
Makita has long been an innovator when it comes to cordless impacts, so it comes as no surprise that they have added even more features to their new BTD144 18 volt impact, and at the same time were able to shorten the length by 1/4-inch from the previous BTD141. The main new features for the BTD144 are the 3-speed selection switch, and a new brush-less motor design. With the speed selection switch, users will now be able to select a lower amount of speed and impacts for jobs that require a more...
Chris   June 11, 2009   0   0  
In the past, when you needed a 20 degree paper tape collated nailer, your choices were very limited, but now with the introduction of the Duo-Fast DF350S you have literally doubled your choices. As with most newer nail guns, the DF350S has all of the features you should expect, like tool-less depth drive adjustment and a dual trigger for both sequential and bump fire nailing (of course bump firing is the fun mode). A tool hook is also something I look for in my nail guns and the DF350S has one that...
Chris   June 10, 2009   0   0  
America's favorite do it all spray, WD-40, introduces a newly designed alternative to their classic aerosol spray can. The new non-aerosol design is said to allow for more spray control; anywhere from a few drops to a steady spray. The Trigger Pro is also not bound by aerosol disposal regulations. I guess now it can technically be taken on airplanes; just not in your carry on luggage. Don't blame me for getting arrested if you do. "Millions of people use WD-40 to maintain and repair equipment, but some of our on-the-job users work in...
Chris   May 27, 2009   0   0  
The Work Sharp sharpening system has been a good option for anyone looking for a powered sharpening system on a budget. We usually don't think of $100 as a budget price, but when the competition is selling for $350 - $600, $100 is a great price. One of the things the Work Sharp system was missing that the competition has, is the ability to sharpen knives. This is a problem no more with the addition the the Sharpening attachment for the WS2000. For around $35 the knife attachment uses abrasive belts up...
Chris   May 26, 2009   0   0  
Are you still using a hammer to drive your nails? Well stop. Pneumatic nailers are easier and faster to use, and with advancements in technology, they are becoming more and more affordable for even the lightest users. Plus, your purple thumb will thank you. Campbell Hausfeld is a huge name when it comes to air tools. They make just about everything air tool related and they have just announced 3 new air nailers. "After extensive consumer research, we set out to totally redesign the tools so they make it just as easy...
Chris   May 11, 2009   0   0  
Build Priceless Memories with Inexpensive Projects this Father’s Day SKIL and Lowe’s Partner for Building Memories Contest MT. PROSPECT, IL – Make this Father’s Day special by spending a lot of time with Dad instead of a lot of money. SKIL Power Tools and LOWE’S Home Improvement are offering inexpensive projects designed to provide hours of priceless memories for kids and dads alike. In addition, you can take advantage of the opportunity to enter your family fun project into the SKIL Building Memories Contest for a...
Chris   April 27, 2009   0   0  
We spend a lot of time looking at expensive professional tools here at Tool-Rank, and we sometimes forget that you can get great tools at a low price. The new SKIL Lithium Ion tools fit this criteria by offering 18-Volt Lithium Ion technology, lighter weight, and a compact design at a price that is friendly to your average DIYer, and contractor. SKIL has a number of new tools 18-volt lithium ion tools that should fill most of your cordless tool needs. The 18 Volt Lithium Ion 1/2 In. 2-Speed Drill/Driver (Model: 2895LI-02)...
Chris   April 16, 2009   0   0  
Are you looking for a 10" dual bevel sliding compound miter saw with great cutting capacity, and don't want to sell your first born to be able to afford it. The Makita LS1016 is probably the saw for you. Most of the specs are what you would expect from a 10" except for the large 4-3/4" vertical cutting capacity which is much larger then their saws previous 3-5/8". The LS1016 saw also uses a new rail system from Makita that uses 6 linear ball bearings that are said to deliver smooth, solid and adjustment-free accurate cuts. The four...
Chris   April 15, 2009   0   0  
This is great news... Bosch has finally come out with a full line of pneumatic fastening tools aka nail guns, and compressors. Anyone that uses nail guns all day (like I do) knows how much a great gun can make a difference, so I hope these gun are great. One more brand to help improve nail gun technology is great news. The new Bosch pneumatic line uses a new Full Force Technology to drive the fasteners. From my understanding other nail guns use the built up pressure of the driving head to...
92 results - showing 71 - 80  
1 2 3 4 5 6 7 8 9 10