9 results - showing 1 - 9
Ordering
SulSaw
January 01, 2009
0
1
Porter-Cable FCN200 2" Flooring Cleat Nailer Features: •Drives "L" shape cleat nails from 1-1/2" to 2" •Pneumatic driving action consistently drives fastener for better finished installation •Unit comes fully assembled and ready for use right out of the box •Strong, lightweight, die-cast aluminum housing •Non-Marring base is designed to allow driving of fastener close to wall •Better balance for stability - tool sits upright for smoother floor installation •Rear-load gravity feed magazine with a bypass pusher •Air fitting is angled so hose does not interfere with magazine or operator •Ergonomic design with longer handle for easier use •Hardened driver...
PutnamEco
January 01, 2009
0
1
FEATURES Drives Senco type "N" wire 16 Ga. 1/16" crown construction staples from 1" to 2" long Powerful piston with Teflon® ring design that prevents cylinder bore scuffing - lasts far longer than conventional "O" rings Tool-free adjustable exhaust diffuser Open top-load hard coat anodized magazine with push-button follower accommodates two 70-staple strips or three 50-staple strips Quick-release nosepiece for easy jam removal Tool-free depth-of-drive adjustment to enable fastening without staple drive-through Standard Equipment: Stapler, 3/8" NPT air inlet w/ 1/4" male quick plug with dirt & dust cover, rugged carrying case, oil, wrenches, and operating manual SPECIFICATIONS Fastener...
PutnamEco
December 30, 2008
0
1
1/2- to 1-1/2-inch 18-gauge narrow crown stapler with factory installed air fitting for convenience
Selective actuation switch to choose between bump fire or sequential fire modes; tool free depth adjustment
Tool-less, easy to clear nose for quick staple extraction; magazine holds up to 130 staples for efficiency; no-mar tip; 360-adjustable exhaust
Includes safety glasses, air fitting, hex bar wrenches, case
10.3 x 2,3 x 9.2 inches (LxWxH); 2.3 pounds; 5-year warranty
SulSaw
December 29, 2008
0
1
Uses standard Ga., 1/4" crown staples from 1/2" to 1" long Special hardened driver blade Tool-free jam release mechanism designed not to block line of sight Sequential fire trigger Strong and light weight die-cast aluminum body Contact safety located behind driver guide for stapling in tight spaces Tool-free depth adjustment for exact setting of staple Removable rubber nose cushion protects delicate work Tool-free directional exhaust port Standard Equipment: Stapler, 1/4" male quick plug with dust cover, carrying case with provision to store 5,000 staples, box of 1,000 staples, oil, wrenches, and operating manual
SulSaw
December 21, 2008
0
4
Uses 16 GA. finish nails from 3/4" to 2-1/2" Streamlined body design for better grip, balance, and style Sturdy aluminum extruded magazine Internal piston catch mechanism keeps piston at initial position - for consistent power Tool-free nail depth control with detents Tool-free jam release mechanism designed not to block line of sight Tool-free adjustable exhaust Non-marring nose tip with on tool storage Standard Equipment: Nailer, case, box of 1000 finish nails of 2", 1/4" plug with cap, oil, wrenches, and operating manual
PutnamEco
September 17, 2008
0
1
2-1/2-inch coil siding nailer operates at 70-120 psi; accepts plastic and wire collated nails
Tool free depth of drive adjustment; air deflector pivots 360 degrees;
no-mar nose cap
Anodized aluminum and comfortable rubber grip
Includes safety glasses and 2 hex bar wrenches10-1/2 by 5-1/6 by 11-13/16;
5 pounds; 1-year warranty
PutnamEco
September 09, 2008
0
1
1-1/4- to 2-1/2-inch 15-gauge angled finish nailer with integrated air duster for clearing away dust and debris
Simple depth of drive adjustment; easy clear nose; adjustable air deflector
Lightweight aluminum body; durable composite magazine
Measures 13.5 by 3.2 by 11.9 inches (L by W by H); lightweight at 4.4 pounds; 5-year warranty
Chris
August 24, 2008
0
2
Chris
January 16, 2008
0
1
9 results - showing 1 - 9