toolrankcom_100x358
Tormek Water Cooled Sharpening System - T-7

Tormek Water Cooled Sharpening System - T-7

https://www.tool-rank.com/media/listing/photos/thumbnail/300x300s/d4/75/c6/269_tormekt7_1223599650.jpg
Chris   October 09, 2008  
 
0.0 (0)
0   1  
  Add Media
Write Review
Tormek Water Cooled Sharpening System - T-7
Manufacturer
Model #
T-7
Includes:
T-7
SE-76 Square Edge Jig
TT-50 Truing and Dressing Tool
SP-650 Stone Grader
WM-200 AngleMaster
PA-70 Honing Compound
HB-10 Handbook
Tormek DVD

The most complete edition of the finest wet stone sharpening system available, the T-7 is rated for continuous use and has a vast array of specialty jigs available so you can quickly and easily sharpen virtually any tool in your house, backyard shed or workshop. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding while it continuously cools the tool edge to prevent "bluing" the metal. After grinding, the 8-3/4" x 1-1/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The exclusive SE-76 Square Edge Jig, included with the T-7, changes the task of grinding tools square from tricky to foolproof. It references from the flat side of the tool for unparalleled ease in tool mounting. It also has travel limit stops that prevent you from running the tool off the edge and scraping a knuckle. The T-7 System also includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Handbook and Instructional DVD.

  • Square Edge Jig accepts blades up to 76mm or 3" in width.
  • Square Edge Jig features safety stops, which prevent the tool from slipping off the stone.
  • Truing and Dressing Tool with screw feed: Trues the grindstoneexactly round and flat. Guided by the Universal Support, which alsoguides the jigs. Dual knobs for smooth feed across the stone.
  • Stainless steel hardware: Prevents rust and wear on bearings.
  • Universal Support with acme thread: Round section without flat machining makes it faster to change position.
  • Improved Horizontal Base: Double locking screws and tighter fit for maximum precision.
  • Micro Adjust with scale: For a predetermined cutting depth when using the TT-50 Truing and Dressing Tool.
  • 7-year warranty applies to all customers, including industrial users.

User reviews

There are no user reviews for this listing.
Already have an account?
Ratings (the higher the better)
Function
Does the Tool do what the manufacturer says it can do?
Quality
What is the overall Quality of the Tool?
Value
Is the Tool worth its price tag?
Comfort
Is the Tool comfortable for you to use?
Pros / Cons
Other
Comments
You will be able to upload media right after you submit your review.

Popular Articles