| 13 results - showing 1 - 10 | 1 2 |
Ordering
|
Hat tip to Jay over at CopTool for discovering this one. It turns out the 2012 Bosch Tool Catalog is now available at select tools stores and available online, and hidden inside its paper-thin walls are a few exciting new tools. Jay discovered a new Bosch Laser that is specifically designed to check the levelness of floors as well as a new Bosch wet tile/stone saw. Too bad it looks like the floor level cannot be used on walls. When doing wall paneling, a flat wall is a must and making a wall flat is the hardest part. ...
Update: Website and additional photos added.
Early next year Swanson Tools will be launching a new professional line of hand tools called Savage. Now I always figured Swanson tools were already for professionals, so I guess this new line of tools will be for more professional professionals, not just your everyday run of the mill professional.
When we are looking for accurate and repeatable measurements, we often turn to the trusty story pole. Though, our story pole usually consists of just a scrap piece of wood that is either cut to the right length or has measurement markings drawn on it. After all, being able to use the scraps we already have on hand, is what makes the story pole great. But what if you are doing a lot of measuring, and you need something that is going to be able to handle the abuse that goes along with production work? ...
Finally we have a solution for getting marks or lines in really narrow places. Countless numbers of times I find that I need to mark layout holes for brackets, but the small holes combined with the thickness of the brackets make it impossible to get the tip of a pen or pencil through. Bleispitz has a new product that is specifically designed to reach into narrow places and make marking a simple task again. What they have is a marker with a tip that is almost a full inch in length (25mm). The tip...
DeWalt has just announced the launch of their new 3-beam line-laser (DW089K), and oh how I love to use lasers at work. They make leveling so easy that it is funny to even think about going back to using regular levels to mark long level lines across walls. I think the line-laser is one of the most invaluable tools on the jobsite, at least in my trade. The DW089K is not unlike other line-lasers on the market today, but it does have a rather handy added feature, a third laser line. This extra vertical line gives...
In 1872 J. Robinson patented the first butt-locking sliding t-bevel, and ever since, his model has been the paradigm to all other models. It is an invaluable tool for people of all trades and can be used to easily duplicate and transfer any angle you can find; with a little help from a protractor, these angles can even be identified. The only downside to the t-bevel is that it can not be used to accurately set 90-degree angles. Almost 140 years later Patrick Leach comes along and sets a new paradigm with his new sliding t-bevel that...
Swanson, the makers of the ever popular Speed Square, have come out with a new layout tool that does it all, or almost all. Their new Speed bevel has all the features and looks of their classic Speed Square, but with a little transformer magic, turns into a T-bevel. With a little more transformation you have a try-square; in total the Speed Bevel offers 5 different layout tools in its one small fold-able package. Heck, the fact that you can fold down and make a Speed Square smaller, is all it took to sell me on...
When is a Stabila level not a Stabila level? When it is a Masterforce level that is made in Germany by Stabila. That's right, the Menards hardware store line of Masterforce levels are actually made by Stabila. The Masterforce levels look like they are an old model of level that Stabila no longer sells under their own name, but if you go to any large jobsite, you would be sure to see these same level in Stabila yellow. There are a couple of advantages to purchasing a Masterforce level over a Stabila, the first...
Math gets in the way of great woodworking projects. Yeah, I know it might be hard for some of you to believe, but amazing looking furniture was being built long before the masses knew the wonders a+b=c and all that jazz. Sure a tape measure comes in handy when you need to divide 73-3/16 by 5, but that is only because we were never taught the ways of old. So what can replace a tape measure and the knowledge math? How about two sticks and a hinge, or what is commonly known as a "sector". So we...
Unless you are using a standard angle crown molding that matches you saw's presets, and you are only doing 45 degrees corners, calculating the correct angles for your crown is no walk in the park. This is why miter finding tools are so handy. But if you are a DIYer, you probably don't want to spend money on a tool you will probably only use once or twice. Good thing for you, with a little bit of work, Google SketchUp can calculate those angles for you. All you have to do is photograph the profile of...
| 13 results - showing 1 - 10 | 1 2 |
