http://www.tool-rank.com/ 623-151 http://www.tool-rank.com/layout-and-measuring/Lasers/bosch-self-leveling-cross-line-laser-gll2-50-20100303623/ This is a great laser for any indoor leveling needs. I was able to buy it on sale for a good price, but after using it a few times I can see that it is worth paying full price. The laser is not bright enough for outdoor use, but this is not a problem for me. It doesn't do a full 180 degrees like some other lasers, but I never found this to be a problem. Probably one of the best features of the laser is the included stand. It has a magnetic back that can be mounted, a tripod mount on the bottom, and it can also be used on a table top. It also has a rack & pinion type up and down adjustment, that really comes in handy. ]]> Wed, 03 Mar 2010 06:50:29 -0600 490-137 http://www.tool-rank.com/layout-and-measuring/Tape-Measures/fast-cap-old-standby-tape-measure-20090718490/ I've owned a couple of these and I love them....until the rubber starts peeling off. Within a year or two the rubber coating on the outside started to peel off leaving little chunks in various places and making the tool less comfortable to work with. I would give up the rubber coating altogether if I could have a hard plastic case that would last longer. I do like to write measurements on the side of it occasionally. Maybe the cell phone rings or somebody walks up. For whatever reason I find it handy to jot down whatever on the side for later use. ]]> Mon, 20 Jul 2009 22:14:47 -0500 490-136 http://www.tool-rank.com/layout-and-measuring/Tape-Measures/fast-cap-old-standby-tape-measure-20090718490/ This ruler has worked out well for me, after I got used to it. I usually use Stanley's Fat Max rulers and have become accustomed to their use. Two things are different on this ruler compared to the Fat Max. The hook does not have a lip on top, this feature is what I miss the most, second, this ruler has an additional lock button positioned under the bottom of the outfeed slot, this I find most handy for making multiple fast inside measurements.This ruler will not stand out as far as the Fat Max, but I don't really find that to be much of a problem as I use this ruler for mostly shorter measurements. The case seems durable, with its rubber coating. There is a pencil sharpener built in, that I seldom use. The belt clip is different. It has a extension over its top that allows you to open the clip, making it easier to clip on, this is especially handy for me as I often clip this to the corner of my pocket and not all my pants have the stiffness to open a normal clip. This ruler also has a small surface that you can write on, which has on occasion, come in handy. ]]> Sat, 18 Jul 2009 16:31:58 -0500 144-127 http://www.tool-rank.com/layout-and-measuring/Laser-Measuring/bosch-digital-laser-range-finder-kit-dlr165k-20080427144/ Great tool. Price to value makes it a no brainer. Speeds up estimates for interior work, has a area and a volume function. Exvactly accurate. A few smal negatives when this is compared to the other laser measuring devices on the market: No memory to store measurements and no way to convert to inches/fraction, gives distance in feet, inches and fraction only. ]]> Wed, 20 May 2009 04:18:52 -0500 380-109 http://www.tool-rank.com/layout-and-measuring/Levels/Stabila-25010-torpedo-level-20090205380/ This is a plain straight up torpedo level, nothing more, nothing less. No magnets to trap iron filings to its base. No lasers, with batteries that are almost always dead when you need them. No extra vials to confuse things. No rotating vials to wonder about just how accurate their stops are. Tapered to make sliding into a tool pouch a breeze. Nearly indestructible,I've lost count of how many times mine has been dropped, yet it is still dead on level. Great warranty. ]]> Thu, 05 Feb 2009 16:03:48 -0600 341-96 http://www.tool-rank.com/layout-and-measuring/Chalk-Lines/Tajima-Chalk-Rite-II-20090101341/ This chalk box come with a finely braided line that leave a thinner line than is usual for most chalk boxes. It comes with a lock that will hold the line, so you can use it without having to touch the line. The lock automatically disengages when you retract the line. This is a nice feature if you can remember to use it. (I can't, old habits die hard) This box feels light weight, that, to me, means it may not be that durable, but in the years that I've owned it I've yet to break it, despite being dropped off roofs and the other indignities that chalk boxes endure on the job site. ]]> Thu, 01 Jan 2009 22:41:46 -0600 144-51 http://www.tool-rank.com/layout-and-measuring/Laser-Measuring/bosch-digital-laser-range-finder-kit-dlr165k-20080427144/ I use mine for doing estimates, which it is the absolute greatest thing at. Just stand in one corner of a room and shoot the length and width in about ten seconds flat. Takes longer to move yourself, than to take the measurement.
I guess I'm to old school to really trust this. I've yet to commit a cut solely on the measurement I've gotten from this. I don't really like to use a ruler either, unless I have to. ]]> Thu, 11 Sep 2008 22:13:58 -0500 144-25 http://www.tool-rank.com/layout-and-measuring/Laser-Measuring/bosch-digital-laser-range-finder-kit-dlr165k-20080427144/ Introduction: Up until a few years ago, it was almost impossible for the average person to afford a digital laser rangefinder of any kind; the fact that they were also unreliable didn’t help either. Now with the advancements of newer technologies, and cheaper costs, DLR's have come down quite a bit in price over the past few years. The Bosch DLR165K is also a lot cheaper then most other DLR's because it is capable of about half the distance range. This for most people is a great thing, because who really needs to measure more then 165 feet? If you do need more distance, you are looking to pay about double the price, for double the distance. Features: Pocket-Sized Only 4" tall Four Measuring Reference Points - Back, front, swing out extension pin for measuring from inside corners or channels, or center of optional tripod Three Measurement Systems — Feet and inches, decimal feet, and metric Length, Area and Volume Measuring Capability — Continuous Measurement Mode — Measurement automatically adjusts when walking-off distances Continuous Laser Mode — Reduces the number of key strokes when making rapid sequence of measurements Indirect Length Measurement Mode — Calculates inaccessible distances that cannot be measured directly due to obstruction or lack of reflecting surface using Pythagorean theorem (a2 + b2= c2) Ergonomic Soft-Grip Area — For sure grip and comfort Specifications: Battery Life: Approximately 30,000 Individual Measurements Country of Origin: Switzerland or Romania Dimensions: 4? x 2-15/16? x 1-1/4? (100 mm x 68 mm x 32 mm) Laser Class: 2 Laser Diode: 635 nm, < 1mW Measuring Accuracy, Typ: +/- 1/16" (1.5 mm) Measuring Range: 2? - 165' Measuring Time, Max: 4 sec. Measuring Time, Typ: < 0.5 sec Power: 4 AAA Batteries The Box: As you can see, the box is nothing special, and it really doesn’t need to be. If you are buying this from a store, they most likely either have the boxes locked up, or in the back of the store, and they will have a display model available. The display model has much more information then the back of the box, and in some cases a demo unit. My local store had a full demo unit with a simple instruction guide on the basics of the Bosch Digital Laser Rangefinder. You can see that your precious new toy is safely packed in its case inside the box, and also includes 4 AAA batteries, and wrist strap. The case also features a hook & loop belt loop, so you can carry around with you. You can also see a good size comparison with the batteries. Inside the box below the DLR are the instructions, and registration card. A Closer Look: The controls on the DLR165K are so simple you don’t really even need to read the instructions. I have had this unit of a few weeks now, and I haven’t read them yet. Basically just looking at the icons and pushing the buttons, you can figure out everything. The Big Red button is for turning the unit on, and for capturing a measurement. From left to right, the first button is for measuring area, or volume. Next is for measuring length, or continuous measuring. Meaning, the DLR will update the measurement while the length is changing. This would be handy if you need to position yourself at a certain point. Think of the movie The Italian Job, where they are trying to position themselves X amount of feet from the walls to end up exactly below the safe. The top right button is for change the point from which the unit measures from; either from the front edge, the back edge, the point of the extension pin, or the tripod hole. The next line is for adding and subtracting measurements. The Bottom left button is for clearing measurement. The middle is used to turn the unit on and off. The last bottom right key is used to change the measuring unit to Meters, Foot decimals, or Foot inches. Sadly there is no Inch only option. Looking at the back of the unit you will find a red switch to release the extension pin. The extension pin is needed when measuring from within a corner, or other tight spot. You will then need to set the unit to measure from the pin. On the front of the unit you can see where the DLR emits the laser, and reads the distance. Don’t try to measure the distance to your co-workers eyes. It also has a flat area on the front, so when you measure from the front, you have a nice flat surface to measure from. The Test: When I first brought the DLR165K home, I took it all around the house and tested it against my tape measurer. It was spot on every time. For the real test I took it to work and used it to measure pre-finished Oak baseboard I was going to install around a custom Oak TV cabinet. There was absolutely zero room for error. It had 6 outside corners, and 4 inside corners, and varying sizes. Again it was spot on every time, I only had to re-cut one piece, and that was because of human error. I accidentally wrote down 3/16” when the cut was 13/16”. All throughout this job, I have been putting it to the test, and it has come through every time. The only thing I haven’t tested it on is really log distances. I don’t even know how I would test it. I figure this has to be more accurate then counting paces or using a wheel. What I dislike about this unit is the fact that it doesn’t measure in running inches it only does foot inches. This is not a huge thing, but something that is annoying to someone like a finish carpenter that measures in only inches. Another thing is the shape of the unit. I would have preferred if the unit consisted of entirely square edges, and corners. It is designed for ergonomics, but makes it a tad harder measure against certain objects. Conclusion: So is it worth the price? In my opinion yes. I would buy this again. It is very simple to use, just be sure to remember where the unit is measuring. You don’t want to measure from the back, thinking you are measuring from the front. It is a great price to foot ratio, and a good investment. Bosch, take note. The on your next version add running inches, and squarer edges. I think what would be ideal is square edges, with slightly clipped corners. ]]> Wed, 13 Aug 2008 21:48:49 -0500 67-9 http://www.tool-rank.com/layout-and-measuring/Tape-Measures/stanley-33-725-25-fatmax-tape-2008012767/ The good things about this tape are the long standout, and the over sized hook end. With the long standout, it is easier to measure long ceilings by yourself; but you could measure even further if it had markings on the back side of the tape as well. This is one thing I do not understand about Stanley, and most other tape makers. It is so much easier to read the back side of a tape when you are measuring above your head. The main gripe I have is with the size and weight. Sure it stand out 11 feet, but it weighs way more then all other tapes. The other problem I have is with the blade armor. It is there to help protect the tape in the first 6" but it also prevents the tape from locking in the first 6". So if you measure small things all day like I do, this becomes a problem.

Lets just say that I am still open to new tapes, but this tape still does its job. ]]> Sun, 27 Jan 2008 22:32:24 -0600