Porter-Cable MS200 16 Gauge Medium Crown Stapler

Porter-Cable MS200 16 Gauge Medium Crown Stapler Hot

http://www.tool-rank.com/media/listing/photos/thumbnail/300x300s/62/a5/cf/339_MS200_1230829168.jpg
PutnamEco   January 01, 2009  
 
0.0 (1)
0   1  
  Add Media
Write Review
Porter-Cable MS200 16 Gauge Medium Crown Stapler
Manufacturer
Model #
MS200
MSRP
$455.22
Includes:
carrying case,
1/4-inch male quick coupler plug with dust cap,
oil,
Allen wrenches,
operator's manual

FEATURES Drives Senco type "N" wire 16 Ga. 1/16" crown construction staples from 1" to 2" long Powerful piston with TeflonĀ® ring design that prevents cylinder bore scuffing - lasts far longer than conventional "O" rings Tool-free adjustable exhaust diffuser Open top-load hard coat anodized magazine with push-button follower accommodates two 70-staple strips or three 50-staple strips Quick-release nosepiece for easy jam removal Tool-free depth-of-drive adjustment to enable fastening without staple drive-through Standard Equipment: Stapler, 3/8" NPT air inlet w/ 1/4" male quick plug with dirt & dust cover, rugged carrying case, oil, wrenches, and operating manual SPECIFICATIONS Fastener Type (Inches): 16 Ga. 7/16" Crown Staple Shipping Weight (Lbs.): 13 Fastener Range (In): 1 to 2 Magazine Capacity: 150 Staples Jam Clearance: Hinged Lever Type Quick Release Nose Operating Pressure: 70-120 psi Firing Modes: Sequential & Bump Fire Height (Inches): 10-3/4 Length (Inches): 14-1/8 Weight (Lbs.): 5-7/8 WARRANTY One year warranty with 30-day performance certification

From the Manufacturer Built to last, this medium crown stapler has a piston ring design that prevents cylinder bore scuffing and lasts longer than conventional "O" rings. It will drive 16-gauge, 7/16-inch crown "N" wire staples from one to two inches long. The open top-load magazine makes for easy reloads and will hold up to 150 staples for less down time. An adjustable depth-of-drive mechanism allows countersinking fasteners to match the application. The bump-fire trigger allows for faster operation. Also, though it comes with a 1/4-inch quick coupler, the air inlet is 3/8-inch NPT. This allows the option of using a 3/8-inch quick coupler for better airflow in high-production applications. A quick-release nosepiece is also standard for faster clearing of jammed fasteners. Includes stapler, carrying case, 1/4-inch male quick coupler plug with dust cap, oil, allen wrenches, and operator's manual.

Related Content

User reviews

1 reviews

Already have an account?
Ratings (the higher the better)
Function
Does the Tool do what the manufacturer says it can do?
Power
Does the Tool have the Power to do the job?
Quality
What is the overall Quality of the Tool?
Value
Is the Tool worth its price tag?
Comfort
Is the Tool comfortable for you to use?
Pros / Cons
Other
Comments
You will be able to upload media right after you submit your review.
Overall rating 
 
4.8
Function 
 
0.0
Power 
 
0.0
Quality 
 
0.0
Value 
 
0.0
Comfort 
 
0.0

Nice Stapler for Siding work

This is a fine stapler for siding work. I bought this stapler to install cedar shingles and it does a great job at that. It has plenty of power, enough to sink staples into hardwood.
It is easy to see how many staple remain in the magazine. There is no dry fire lock out so this stapler will continue to fire even when the magazine is empty.
It is fairly easy to select between bump and sequential fire, there is a small selector on the trigger.
If you use this stapler with a light hand it may recoil off the workpiece, thereby not sinking the staple completely. This is not a problem when bump firing.

Pros
power, easy bump/select fire change
Cons
No dry fire lockout.
Made in
Taiwan
Add Media
Was this review helpful to you?